Skip to content
İstanbul ValveIndustrial Valves
← Technical Knowledge

What are DN and PN?

Updated:

DN and PN are the two abbreviations you will see most often in valve catalogues and quotations. You need both to pick the right product.

DN (Diamètre Nominal) – nominal diameter

DN is a dimensionless nominal size for pipes and fittings. It is close to the size in millimetres but is not exactly the inside or outside diameter. For example, a DN50 valve connects to a 2-inch (NPS 2) pipe.

DNApprox. inch (NPS)
DN15½"
DN20¾"
DN251"
DN401½"
DN502"
DN803"
DN1004"
DN1506"
DN2008"

PN (Pression Nominale) – nominal pressure

PN is the nominal pressure in bar a product is designed for at a reference temperature (usually 20 °C). A PN16 valve is designed for 16 bar at room temperature.

  • As temperature rises the permitted working pressure falls; for exact values consult the pressure-temperature table for the body material.
  • The same PN does not guarantee the same strength in different materials (cast iron, ductile iron, carbon steel, stainless steel).
  • Common values: PN6, PN10, PN16, PN25, PN40, PN63, PN100.

ANSI / ASME Class

American standards express pressure rating as “Class” (Class 150, 300, 600, 900…), with sizes in inches (NPS). Class and PN correspond only roughly, and because flange bolt patterns differ, PN and Class flanges generally cannot be bolted together.

What to include when requesting a quote

  • DN (or inch) and PN (or Class)
  • Connection type: flanged, threaded, butt-weld, wafer
  • Body material, fluid and operating temperature
  • Quantity and any standard (EN, ASME, API, etc.)