Flange dimensions by pressure class (PN and Class)
Updated:
A flanged valve fits only if its bolt pattern matches the mating flange on the pipeline. Outside diameter, bolt circle diameter (PCD), number of bolts and hole size change with pressure class and standard, so besides DN and PN you also need to know the flange standard.
The two main standards
- EN 1092-1 (European): pressure class PN (PN6, 10, 16, 25, 40…), size in DN.
- ASME B16.5 (American): pressure class “Class” (150, 300, 600…), size in NPS (inches).
Sample comparison (mm)
The values below are for reference; check the standard or the product data sheet for exact dimensions. PCD: bolt circle diameter.
| Size | Rating | Outside dia. | PCD | Bolts |
|---|---|---|---|---|
| DN50 (2") | PN10 / PN16 / PN40 | 165 | 125 | 4 × M16 |
| DN50 (NPS 2) | Class 150 | 152.4 | 120.7 | 4 × 5/8" |
| DN50 (NPS 2) | Class 300 | 165.1 | 127.0 | 8 × 5/8" |
| DN100 (4") | PN10 / PN16 | 220 | 180 | 8 × M16 |
| DN100 (4") | PN40 | 235 | 190 | 8 × M20 |
| DN100 (NPS 4) | Class 150 | 228.6 | 190.5 | 8 × 5/8" |
| DN100 (NPS 4) | Class 300 | 254.0 | 200.0 | 8 × 3/4" |
What to keep in mind
- PN and Class flanges generally cannot be bolted together; the bolt patterns differ (for example at DN100, PCD 180 mm against 190.5 mm).
- At the same DN, PN10 and PN16 often share a bolt pattern, but not at every size, so check per DN.
- As the pressure class rises, flange thickness, outside diameter and bolt count increase, and the valve gets heavier.
- Facing types: flat (FF), raised (RF) and ring-type joint (RTJ) faces differ. Choose the same facing as the mating flange.
- Face-to-face length is set by separate standards such as EN 558 and ASME B16.10; check it too when replacing an existing valve.
If you send us the DN, PN or Class of your existing flange, and where needed the outside diameter, PCD and number of holes, we can identify a compatible valve together.
