Valve selection guide
Updated:
Choosing the right valve starts with “how does the line work?” rather than “which valve?”. The steps below help you gather the information before you ask for a quote.
1. Duty: what will the valve do?
- On/off (isolation): ball, butterfly, gate valve.
- Flow regulation (throttling): globe valve, control valve.
- One-way flow: check valve.
- Debris protection: Y-strainer.
- Condensate removal on steam lines: steam trap.
- Overpressure protection: safety valve.
2. Fluid
Water, steam, air, natural gas, oil or chemicals: the fluid dictates body and seal materials. For abrasive or particle-laden fluids the seat material matters too.
3. Pressure and temperature
The line’s highest working pressure and temperature set the PN or Class and the material. Permitted pressure falls as temperature rises, so consider them together.
4. Size (DN)
The valve size usually matches the pipe size. For throttling duties it is chosen from the flow calculation.
5. Connection type
- Flanged: common in medium and large sizes; easy to remove and refit.
- Threaded: small sizes and low-pressure installations.
- Butt-weld: high-pressure lines where sealing is critical.
- Wafer / lug: compact butterfly valves fitted between two flanges.
6. Material
- Cast and ductile iron: water and general-purpose lines.
- Carbon steel: high pressure and temperature.
- Stainless steel: corrosive media, food and chemicals.
- Brass: small-bore water and plumbing.
7. Operation
Lever, gearbox, pneumatic or electric actuator. Actuators are considered for large sizes or where remote operation is required.
Quick checklist
- Fluid, temperature and working pressure
- DN and PN / Class
- Connection type and standard (EN, ASME, API…)
- Material and any certificate (e.g. test report) request
- Operation type and quantity
You can narrow down the product list on our site with the DN, pressure and connection filters and add suitable products to the quote cart. If you cannot decide on a point, just write to us.
