Thread types: BSP vs NPT
Updated:
BSP and NPT are the two systems you meet most often on threaded valves and fittings. Even though they share nominal sizes, they must not be mixed.
BSP (British Standard Pipe)
- Thread angle is 55°, based on the Whitworth form.
- G (ISO 228): parallel thread. Sealing is done by a gasket or seating face, not by the thread.
- R / Rp / Rc (ISO 7): R is tapered male, Rp parallel female, Rc tapered female. On tapered joints the thread itself seals, with tape or paste.
- Common in Europe and Türkiye for plumbing and industrial threaded connections.
NPT (National Pipe Taper)
- Thread angle is 60°; the standard is ANSI/ASME B1.20.1.
- Tapered (1:16): the thread flanks wedge together as it is tightened. PTFE tape or paste is used for sealing.
- Common on American-origin equipment, oil and gas and hydraulic applications.
Why must they not be mixed?
At many sizes the pitch (threads per inch) is close or even identical, but with angles of 55° and 60° the profiles do not match. Forcing them damages the threads and the joint will leak or seize.
| Nominal size | NPT (TPI) | BSP (TPI) |
|---|---|---|
| 1/8" | 27 | 28 |
| 1/4" | 18 | 19 |
| 3/8" | 18 | 19 |
| 1/2" | 14 | 14 |
| 3/4" | 14 | 14 |
| 1" | 11.5 | 11 |
| 1 1/4" | 11.5 | 11 |
| 1 1/2" | 11.5 | 11 |
| 2" | 11.5 | 11 |
How to tell them apart
- Check pitch and angle with a thread pitch gauge; a 55° gauge for BSP, 60° for NPT.
- Look for markings: G, R, Rp, Rc or BSP; NPT, NPTF.
- Tapered or parallel: a tapered male thread looks thinner at the tip than at the root.
- If in doubt, send a photo and the dimensions of the part and we will verify together.
Hydraulic lines also use other systems such as metric, UNF and JIC; always state the thread type and standard when ordering.
